SmartSVN offers a shell integration to have the SVN functionality of SmartSVN also present in certain parts of GUI shells, like in file dialogs. The shell integration is currently present on Microsoft Windows and Apple Mac OS X. It is only available when SmartSVN is running (except the one on Mac OS X 10.6).
Commands (Windows and OS X 10.5)
From the shell's context menu, there are the most important SVN commands available for locally versioned files and directories. Performing commands from the shell's context menu results in the same dialogs and windows as if performing the commands from the Project Window . For details regarding the commands refer to Commands.
For commands performed from the shell, the same environmental settings are used as when performing them from the Project Window. This especially implies the Project Settings , if for the current working copy directory a corresponding project exists. If no matching Project can be found, SmartSVN will use the Default Settings .
From the context menu, use Open Project (or Open SmartSVN if no file/directory is selected) to launch the Project Window and open the corresponding project.
For the command icons, the icon files within
lib/icons in the installation directory of SmartSVN are used. The names are corresponding to the command names. For every command, there is a default icon and a grayed version, which has an additional
-g in its name. If you prefer, you can replace these icons.
Commands (OS X 10.6)
Unfortunately, Apple has dropped the Finder integration API with OS X 10.6. Hence, SmartSVN only can provide a very simple alternative using socalled services. From the Finder's context menu three commands are available if files or directories are selected: Update from SVN, Commit to SVN and Open in SmartSVN. Note, that because of the limited services API these commands are available independent of the SVN state of these files or directories. They are even available for items which are not SVN-controlled. In contrast with the shell integration on Windows and OS X 10.5, SmartSVN does not need to be running to be able to invoke the commands. If necessary, SmartSVN will start automatically.
All commands invoked from the shell integration will be executed in a special output window. You may select Close automatically on success to have the window closed automatically after all currently running operations have been completed successfully.
- Use Show Changes on a selected file/directory to see what has been changed locally by executing the command.
- Use Log on a selected file/directory to see the corresponding Log.
- Use Close to close the frame.
- Use Stop on one or more selected commands to cancel them. If no command has been selected, you will be asked whether to cancel all currently running commands.
- Use Customize to customize accelerators.
Refer to Window for more details.
The overlay icons show the SVN states for the corresponding files and directories. Currently, overlay icons are only present on Windows. Because the number of possible overlay icons is limited by the operating system, only the most important SVN states have a special overlay icon, see Overlay Icons for details. Versioned, but unchanged files and directories do not have a special overlay icon. For all other SVN states, the modified icon is used.
|Modified||File/directory is modified in contents/properties.|
|Modified recursively||Directory itself of some file/subdirectory is modified (requires the Status Cache service running.|
|Added||File/directory is scheduled for addition.|
|Removed||File/directory is scheduled for removal.|
|Ignored||File/directory is not under version control (exists only locally) and is marked to be ignored.|
|Conflicted||An updating command lead to conflicting changes either in content or properties.|
|Unversioned||File/directory is not under version control, but only exists locally.|
|Root||Directory is a working root and is not modified.|
For the overlay icons, the icon files within
lib/icons in the installation directory of SmartSVN are used. The names are corresponding to the States used in Overlay Icons. If you prefer, you can replace these icons.
The availability of overlay icons as well as commands can be configured in the.
On Windows, for technical reasons no icon overlays for files within your profile directory
%USERPROFILE% are shown (except of sub-directory
To provide the shell integration without requiring SmartSVN actually being open, SmartSVN can be started with the
--server-mode argument, for details refer to Command line arguments.
Windows Shell Integration
The shell integration adds overlay icons to directory and file views of Windows and SVN commands to the context menu for directories and files. You will especially see them for the Windows Explorer, but also for other software which e.g. uses the native file dialogs of Windows.
You can choose to enable the shell integration for the installation of SmartSVN when using the installer bundle. It's also recommended to have SmartSVN automatically be started with the system startup, so the shell integration is available immediately. The installer offer a corresponding option which will add SmartSVN to the Autostart section, starting SmartSVN in server mode.
Windows supports only a quiet small number of overlay icons. On Windows 10, for example, by default too much overlay handlers are already installed and hence you will see a confirmation dialog that will ask whether to put the SmartSVN overlay icons before the other overlay icons. If you choose not to do that, some overlay icons, e.g. for conflicted files, will not be shown.
The shell integration will be uninstalled together with SmartSVN. You can also uninstall the shell integration independently from the Control Panel, Software, using Repair there.
In the Preferences, you can configure for which drive types and in which range of functions the shell integration shall be applicable. For every drive type you can choose whether to show Icon Overlays (and the context menu) or only the Context Menu or have the shell integration be completely Disabled. If necessary, specify further Paths for which the shell integration will only be applicable with a limited range of functions, either only the Context Menu or completely Disabled. Use only plain paths, like
n:, but no patterns here.
In general it's recommended to have Icon Overlays only enabled for Fixed Drives, because the display of the overlays may slow down your machine due to access to the working copy metadata (.svn directory).
When having working copies located on fast network shares, Icon Overlays should work well here, too. In case you have a mix of fast network shares and, for example, slow VPN-tunneled shares, you may exclude the latter ones by the Paths input field.
Mac OS X Finder integration
The Finder integration lets you update or commit files files from the Finder or just open the working copy in SmartSVN. You can find the menu items Update from SVN, Commit to SVN and Open in SmartSVN in the Finder's context menu.
By default, SmartSVN keeps running even when all frames have been closed. To have SmartSVN still accessible, a tray icon is used. It's available for Microsoft Windows, most Linux desktop managers and other operating systems for which tray icons are supported.
From the context menu of the tray icon, use New Project Window to open a new Project Window , New Repository Browser to open a new Repository Browser or Show Transactions to open the Transactions frame . Open the Preferences or information About SmartSVN. To exit SmartSVN, use Exit SmartSVN.
On Mac OS SmartSVN is permanently available when SmartSVN is running, even when all frames are closed. In this case it has a reduced menu bar, including the Window menu.
The tray icon shows the progress of currently processing SVN operations which have been invoked from the shell extensions. It also shows the presence of new revisions for the Transactions frame; the tooltip gives more information on which repositories have new transactions.
You can disable the tray icon in theby deselecting Nest in System Tray. In this case, SmartSVN will exit once the last frame has been closed.
The Nest in System Tray option is not regarded when starting SmartSVN in server mode .
The Status Cache is an optional Windows service which manages SVN status information for your working copies. It's primarily used to displayed the recursively modified state for directories, which is denoting that some files/subdirectories are modified. Also, the initial scanning/refresh accesses Status Cache information to quickly give a preview of the working copy.
To avoid unnecessary system load, the root directories which will be served by the Status Cache have to be explicitly configured. SmartSVN will ask you to do so for the first command which you perform through the Shell Integration. The Status Cache can be reconfigured any time in the:
Cache Roots specifies the file system roots which will be served by the Status Cache. Enter every root directory on a new line, wildcards are not allowed here. Optionally you can reset the Status Cache by Clear all cached status information. Selecting this option is only recommended if you definitely want to get rid of cached status information for a certain root directory as cached information is not discarded by simply removing this root directory from the Cache Roots list.
You should carefully determine which root directories should be be served by the Status Cache, as the Status Cache will introduce a certain overhead to your system's load. This overhead comes more apparent the slower the file system to cache is. In general you should:
- Only configure to cache local harddisks
- Avoid caching of possible temporary directories which might receive temporary working copies
- Don't create a too detailled list of individual directories to cache
So for instance, if all of your working copies are located at a separate drive
D:, it will be perfect to have the Status Cache configured for this single root directory
D: and nothing else.
If you are only rarely working with the Shell Integration and additional recursively modified state is not important to you, you may completely uninstall the service. This can be done via the Control Panel/Add or Remove Programs, selecting the SmartSVN installer, Change and within the installer using Change again.
The Status Cache settings are stored in
%COMMONAPPDATA%\SmartSVN\statuscache-1, which is usually
C:\ProgramData\SmartSVN\statuscache-1. System properties can be configured in
The SmartSVN Status Cache service runs under the system account and hence does not know about your SVN
config file. Hence,
global-ignores specified in this file will usually not be honored. There has been a workaround implemented for the common case where there is only one regular user account on your machine: in this case, the Status Cache will use this account's SVN
config file instead. If this won't work for you, you may specify a custom SVN configuration directory in
statuscache.properties, using system property
statuscache.svnConfigDirectory. For example: